Kendaraan

The scope of CCC certification for motor vehicles shall be in accordance with the requirements of the Implementing Rules for vehicles of category M, N and O (including complete vehicles and non-integrated vehicles). The certification according to the general safety standards eg GB 7258 "technical requirements for the safe operation of motor vehicles", For specific product inspection articles, please refer to the implementation rules of CNCA-C11-01: 2014 Automotive Annex 1 Type Test Projects and Standards.

1, How long does it take from the application to the receipt of the certificate?

90 days are set by law for cetification. According to experience, these sometimes take longer.

* it could result in a delay in processing:

if application documents are not complete,

if there are problems with testing in the Test Lab,

if there is a deviation in the audit.

Source: CCAP-C11-01: 2014 / A1 page 4, item 6.2

2, How often does factory audit take place?

Plant is classified after the initial audit in A, B, C, D.

A: Factory audit takes place once every 2 years.

B or C: Factory audit takes place once a year.

D: Factory audit takes place at least twice a year.

Source: CCAP-C11-01: 2014 / A1 Page 2, Point 4.2, CCAP-C11-01: 2014 / A1 Page 13, Point 10.2

3, how many audit days are there at the Inital Audit or the FU Audit?

Initial Audit: up to 10 man day per model series, depending of subparts certified

FI audit: up to 6 man day per model series

Source: CCAP-C11-01: 2014 / A1 page 9, clause 9.2.1.2,

CCAP-C11-01: 2014 / A1 page 14, item 10.3.2

4, how is the audit conducted?

Factory audit is performed according to IR CNCA-C11-01 Appendix 5

- Responsibility of quality manager: Appointment letter and service description (creation of control documents, management of change, complaint, CCC mark, CCC certificate status, etc.)

-Technical documentation: management of technical documents, control plan, product standard, product description of existing / new products, etc.

-Overview control: control of property, model and supplier of core material and core components, etc.

- Checking product compliance: running tests, final tests, etc.

Review of production process compliance: review of product structure, material and component, conformity of core production process, etc.

Product Check: Requalification Test

Change control: control of change request, etc.

Control of serious quality problems: customer complaint, recall, etc.

Source: IR CNCA-C11-01 Appendix 5

5, which application documents should be submitted to the initial audit?

  1. Application form
  2. License in copy-Pertanyaan termasuk informasi singkat tentang perusahaan, proses produksi, daftar fasilitas produksi inti, daftar instrumen uji inti, bukti merek dagang terdaftar, dll.
  3. Car structure and technical parameters
  4. COP control plan
  5. Declaration: how is type, series defined
  6. Declaration: how is VIN defined
  7. Explanation: we distinguish the different types by external marking
  8. Declaration: Operating instructions in Chinese
  9. COC certificate
  10. Review
  11. Quality Manual
  12. Quality system certificates in copy
  13. Etc.

Source: CCAP-C11-01: 2014 / A1 Page 22-23 Appendix 1

6, how is Unit (technical unit) defined?

Step 1: Group car first after series defined by manufacturer

Step 2: Units are removed from the same series

It can not be defined as a unit if:

- Car types are not the same (M1 - up to 9 seater, M2 - from 10 seats, M3, N1, N2, N3, O1, O2, O3, O4), see below 8.1.1, 8.1.2, 8.1.3.

- car series is not equal

- position of the engine is not equal (front, middle, rear)

- fuel is not equal (gasoline, diesel, gas, electricity, etc. Hybrid "gasoline + electric" is considered as same unit as gasoline engine, hybrid "diesel + electric" is considered as same unit as diesel engine)

- Drive is not equal (four-wheel, non-four-wheel)

- Sum of the axis is not equal

- Etc.

Within one unit:

- Vehicle outside dimension limit: 20%, longest <= shortest x 1.2

- Limit axle position, wheelbase: 15%, longest <= shortest x 1.15

- Limit parameters (total weight, distribution of front and rear axle): 20%

- Etc.

6.1 M1

Same design platform, structure from part before B pillar similar (sedan, station wagon, convertible with hardtop, convertible with folding roof, etc.)

Limit within one unit: Engine KW: 30%, Displacement: 20%

6.2 M2, M3, N1, N2, N3

Limit value for engine KW: 50%, engine capacity: 50%

Limit within one unit: total weight: 20%

Source: IR CNCA-C11-01 Appendix 2

7. Which tests are performed according to which GB standard?

See CCAP-C11-01: 2014 / A1 page 29-45

8, List of key component and materials:

See CCAP-C11-01: 2014 / A1 page 22-23 Appendix 1 page 24-27

CCC News

Geely mendirikan pusat rekayasa Litbang di Jerman Geely mendirikan pusat rekayasa Litbang di Jerman 2019-05-18 - Menurut China News Service Beijing pada Mei 16 bahwa ...
Aturan Implementasi untuk Peralatan Transit Perkotaan Dirilis Aturan Implementasi untuk Peralatan Transit Perkotaan Dirilis 2019-05-06 - Menurut pengumuman terbaru dari Sertifikasi Cina ...
cakupan bisnis laboratorium uji untuk produk China CCC diperbarui cakupan bisnis laboratorium uji untuk produk China CCC diperbarui 2019-04-29 - cakupan bisnis laboratorium uji terpilih untuk China CCC ...
21 Standar GB baru dan revisi dirilis 21 Standar GB baru dan revisi dirilis 2019-04-19 - Menurut pers baru-baru ini dari Dewan Negara RRC, ...
177 Standar GB baru dan revisi dirilis 177 Standar GB baru dan revisi dirilis 2019-04-04 - Menurut pers baru-baru ini dari Dewan Negara RRC, ...
Daimler akan menginvestasikan 500 juta euro untuk memproduksi kendaraan listrik Daimler akan menginvestasikan 500 juta euro untuk memproduksi kendaraan listrik 2019-03-24 - Grup Daimler akan menginvestasikan 500 juta euro (sekitar ...
Standar GB untuk produk mobil China CCC diperbarui Standar GB untuk produk mobil China CCC diperbarui 2019-03-17 - menurut pengumuman baru-baru ini dari CNCA (China National ...
Tesla Model 3 - Upacara Pengiriman Pasar Cina Tesla Model 3 - Upacara Pengiriman Pasar Cina 2019-03-15 - Pada Januari 22, 2019, Upacara Pengiriman Pasar Model 3 China ...
Sertifikasi produk CCAP untuk kendaraan bermotor Sertifikasi produk CCAP untuk kendaraan bermotor 2019-03-12 - Untuk menerapkan semangat China National Ce ...
aturan implementasi terperinci untuk peralatan audio dan video direvisi aturan implementasi terperinci untuk peralatan audio dan video direvisi 2019-03-10 - Pusat Sertifikasi Mutu China (CQC) merevisi peraturan tersebut ...

Support

Unterstützung

Anda bekerja sesuai kecepatan Anda. Anda dapat menangani proyek Anda secara mandiri melalui portal kami, serta menanyakan tentang dukungan pribadi. Oleh karena itu kami telah berkomitmen untuk memberi Anda kesempatan untuk merancang proses Anda sendiri, tanpa harus menyerahkan dukungan melalui portal kami melalui kami

Administrasi Online

Verwaltung Online

Kami menawarkan Anda kesempatan untuk melaksanakan proses sertifikasi Anda sendiri, tetapi tanpa harus mengorbankan pengetahuan atau dukungan dari karyawan yang berpengalaman. Sistem online dirancang untuk berbagai sertifikasi dan menawarkan Anda juga daftar FAQ, serta formulir dan tabel siap pakai, serta modul untuk memperjelas pertanyaan terbuka dengan salah satu karyawan kami.

Ubah Sertifikasi

Ubah Sertifikasi

Dalam perubahan waktu cepat kami dalam kehidupan bisnis adalah iringan konstan. Struktur tetap yang digunakan untuk membangun selama bertahun-tahun sekarang dapat dihancurkan dengan sangat cepat. Ada alasan internal dan eksternal untuk ini. CS memberikan gambaran tentang kesesuaian selama perubahan.

Kerja sama

Kerjasama

Karena kita semua hanya memiliki waktu dan kapasitas keuangan yang terbatas, dan ingin menawarkan kepada pelanggan layanan yang komprehensif, kerjasama hanya masuk akal di antara organisasi-organisasi terkait. Ini memiliki struktur yang dapat diandalkan, serta harmoni interpersonal yang baik.

Pergi ke atas